Technical Specifications: PCNC 1100 Series 3 CNC Mill

Table Size: 34" x 9.5"
Table Slots: 3 Slots 5/8"
Travel: 18" x 9.5" x 16.25" (X,Y,Z)
Spindle Nose to Table: 17" maximum
Spindle Center to Column: 11"
Spindle Nose Diameter: 3 3/8"
Shipping Dimensions: 56" x 45" x 60"
Weight: 1130 lbs net / 1296 lbs gross (excludes stand)
Max Workpiece : 500 lbs Maximum
Power Requirements:
  • 230-250 VAC 50/60 Hz single phase (primary). 20A breaker recommended
  • 115 VAC 50/60Hz (secondary)
Frame and Table Cast iron frame and table, with hand scraped hydrodynamic ways and tapered adjustment gibs
Way Surfaces Low friction PTFE-filled Acetyl bonded sliding surface. Similar to Rulon® and Turcite®
Spindle Taper: R8 (optional BT30 retrofit available)
Spindle Construction: Cartridge with spindle lock
Spindle Drive: Emerson Control Techniques™ Sensorless Vector Technology with Fold-back logic
Spindle Power: 1.5 hp Brushless AC 3-phase Induction Motor,
Vacuum Pressure Impregnated (VPI) Windings
Spindle Speed: 100 to 5140 RPM
Transmission: V-Belt Drive, 2 ratios
Feed Rate: 110 IPM (X,Y)
90 IPM (Z)
Axis Drives: High Performance Polyphase Stepper
Motors with Leadshine® Microstepping
Drivers. - Learn More
Ballscrews Ground P4 Ball Screw with anti-backlash double ball nut
  • Incremental Error: <.0006"/ft
  • Cumulative Error: <.0008" at 35"
Operator Console Complete spindle control, plus
  • Spindle Lock-Out Key
  • Coolant On/Off/Auto
Additional Control Features
Coolant / Oiler Capacity: 7 gallons
Auto Oiler Capacity 2.1 quarts
Manual Oiler Capacity: 0.25 quarts
PathPilot Logo

PathPilot® Controller - Standard Features:

  • Support for up to 4-axis continuous machining
  • Intuitive conversational programming
  • 15 GB of system program memory
  • Built-in Dropbox™ support for seamlessly transferring programs