Spindle Power: 3 hp 2.24 kW
Spindle Speed: 100 to 3,500 RPM
Spindle Taper: 5C (with removable insert)
Spindle Bore Diameter: 1.53" (with 5C insert removed) 38.86 mm
Spindle Nose: D1-4 Camlock Mount
Max Feed Rate X/Z: 60 IPM 1.52 m/min
Power Required (Primary): 230 Vac single-phase 20A breaker
Power Required (Secondary): 115 Vac single-phase 20A breaker
Recommended Footprint 72" x 42" 1829 mm x 1067 mm
Typical System Weight: 1800 lbs.
Swing Over Bed Diameter: 15" 381 mm
Swing Over Carriage Diameter: 6.2" 157.5 mm
X-Axis Travel: 10" 254 mm
z-Axis Travel: 12" 305 mm
Recommended Chuck Size: 6" 152 mm
Standard Features: Rigid Tapping Threading Constant Constant Surface Speed
8-Station Turret
Gang Tooling System
Quick Change Tool Post
Full Enclosure
Automatic 5C Collet Closer
3MT Tailstock
PathPilot Logo

PathPilot® Controller - Standard Features:

  • Support for up to 4-axis continuous machining
  • Intuitive conversational programming
  • 15 GB of system program memory
  • Built-in Dropbox™ support for seamlessly transferring programs