Machine Manual

Icon

UM10225: 15L Slant-PRO Lathe Operator Manual 5070482

This is the operator manual for the 15L Slant-PRO lathe.


Icon

TD10530: Upgrading to PathPilot® v2.0.x 609.71 KB

This document gives instructions on installing the PathPilot® v2.x upgrade.

Icon

TD10549: Installing a Machine Arm 673.77 KB

This document gives instructions to install a machine arm on a mill or a lathe.

Icon

TD10534: Owner's Guide: Automatic Collet Closer Kit for 15L Slant-PRO 720.85 KB

This document gives instructions on installing an Automatic Collet Closer Kit on a 15L Slant-PRO.

Icon

TD10163: USB I/O Module Installation 1503084

This document details use of the USB I/O module to integrate external devices with the PathPilot controller.

Icon

SB0050: Turret Tool Holder Compatibility 227676

This document details tool holder compatibility for both versions of Tormach turrets.

Icon

TD10241: 15L Slant-PRO Lathe Lift Kit Instructions 1088744

This document details the installation and use of the of the Lathe Lift Kit to temporarily raise the lathe and remove the attached shipping pallet.

Icon

TD10246: 15L Slant-PRO Lathe Tool Post Installation 967773

This document details the installation of the quick change tool post kit on the 15L Slant-PRO lathe.

Icon

TD10484: Tailstock for 15L Slant-PRO Lathe Certificate of Inspection 152023

This is the certificate of inspection for the Tailstock for 15L Slant-PRO Lathe.

Icon

TD10249: Lathe Collet Closer Installation 1959445

This document details installation and use of the 15L Slant-PRO lathe collet closer.

Icon

TD10413: Turret Installation on 15L Slant-PRO Lathe 4692484

This document details installation of the second generation eight-position turret on the 15L Slant-PRO lathe.

Icon

TD10383: Touch Screen Kit Installation 646972

This document details installation and calibration of the 17” LCD Touch Screen Monitor on the PCNC 770 mill, PCNC 1100 mill, and 15L Slant-PRO lathe machine arms.

Icon

TD10297: Adjustable Tailstock Installation 1700586

This document details installation of the Adjustable Tailstock on the 15L Slant-PRO lathe.

Icon

UM10225: 15L Slant-PRO Lathe Operator Manual 5070482

This is the operator manual for the 15L Slant-PRO lathe.

Icon

TD10384: Machine Arm Install 447282

This document details installation of a Machine Arm on a PCNC Mill without a full enclosure installed.

Icon

TD10382: Oil Skimmer Kit Installation 802380

This document details installation of the oil skimmer on a PCNC 1100, PCNC 770, PCNC 440 or a 15L Slant-PRO lathe. This belt-driven device removes tramp oil from a coolant tank.

Icon

TD10419: Turret Certificate of Inspection 597172

This is the certificate of inspection for the Eight-position Turret.

Icon

TD10240: 15L Slant-PRO Lathe Certificate of Inspection 335296

This is the certificate of inspection for the 15L Slant-PRO Lathe.

Icon

TD10244: 15L Slant-PRO Lathe Arm Installation 662720

This document details the installation of the lathe arm assembly onto the 15L Slant-PRO Lathe.

Icon

TD10358: PathPilot Quick-start Guide 1517680

This document details set up of the PathPilot controller for the PCNC 1100, PCNC 770, PCNC 440, and 15L Slant-PRO.

Icon

TD10307: Turret Installation on 15L Slant-PRO Lathe 3909527

This document details installation of the first generation eight-position Turret on the 15L Slant-PRO lathe.

Icon

TD10243: 15L Slant-PRO Chuck Guard Kit Installation 1259404

This document details installation of the 15L Slant-PRO lathe’s chuck guard assembly.

Icon

TD10387: 15L Slant-PRO Lathe Light Installation 318360

This document details installation of the Lathe Light Kit in the 15L Slant-PRO lathe enclosure.

Icon

UM10225: 15L Slant-PRO Warranty 105493

This is the 15L Slant-PRO lathe's warranty information.

Icon

SM10378: Tailstock for Tormach Lathe 767.43 KB

Zip file includes:
34926_Tailstock_for_Tormach_Lathe.IGS
34926_Tailstock_for_Tormach_Lathe.STEP

Icon

SM10375: 3 Position Gang Block 867.14 KB

Zip file includes:
33902_3_Position_Gang_Block.IGS
33902_3_Position_Gang_Block.STEP

Icon

TD10315: 15L Slant-PRO Lathe Enclosure Installation 6891185

This document details the assembly and installation of the 15L Slant-PRO Lathe enclosure.

Icon

SM10353: 6 Inch Face Plate D1 Type 548.93 KB

Zip file includes:
34106_6_Inch_Face_Plate_D1_Type.IGS
34106_6_Inch_Face_Plate_D1_Type.STEP

Icon

TD10320: 15L Slant-PRO Lathe Turret Oil MSDS 107822

This is the material safety data sheet (MSDS) for turret oil for the 15L Slant-PRO lathe.

Icon

D35227: 15L SlantPRO Lathe w/ Enclosure 196.79 KB

This is a drawing of the 15L SlantPRO Lathe with the enclosure.

Icon

TD10317: DURAKUT 4010 MSDS 80511

This is the material safety data sheet (MSDS) for DURAKUT 4010, a light straw or blue colored synthetic metalworking fluid (PN 31750).

Icon

SM10300: 15L Slant Pro CNC Lathe Solid Models 2.86 MB

Zip file includes:
34444_15L_Slant_Pro_CNC_Lathe_1014A.IGS
34444_15L_Slant_Pro_CNC_Lathe_1014A.STEP

Icon

SM10289: Half Inch Double Position Gang Block Solid Models 612.16 KB

Zip file includes:
33908_Half_Inch_Double_Position_Gang_Block.IGS
33908_Half_Inch_Double_Position_Gang_Block.STEP

Icon

SM10285: QC Tool Post Mounting Plate Solid Models 160.45 KB

Zip file includes:
33202_QC_Tool_Post_Mounting_Plate.IGS
33202_QC_Tool_Post_Mounting_Plate.STEP

Icon

SM10288: Number 1 Toolholder for QC Post Solid Models 239.36 KB

Zip file includes:
33123_Number_1_Toolholder_for_QC_Post.IGS
33123_Number_1_Toolholder_for_QC_Post.STEP

Icon

SM10284: Three Quarters Inch Gang Riser Solid Models 56.16 KB

Zip file includes:
33328_Three_Quarters_Inch_Gang_Riser.IGS
33328_Three_Quarters_Inch_Gang_Riser.STEP

Icon

SM10283: Half Inch Gang Riser Solid Models 168.31 KB

Zip file includes:
33326_Half_Inch_Gang_Riser.IGS
33326_Half_Inch_Gang_Riser.STEP

Icon

SM10287: LH Turning Facing Gang Block Solid Models 262.75 KB

Zip file includes:
33912_LH_Turning_Facing_Gang_Block.IGS
33912_LH_Turning_Facing_Gang_Block.STEP

Icon

SM10286: QC Tool Post Solid Models 115.28 KB

Zip file includes:
30704_QC_Tool_Post.IGS
30704_QC_Tool_Post.STEP