PP1100-UPGRADE - Mach3 to PathPilot 2.0 Upgrade Options for PCNC 1100

Product Info

PP1100-UPGRADE - Mach3 to PathPilot 2.0 Upgrade Options for PCNC 1100

PN: PP1100-UPGRADE

Stock: In Stock

These PathPilot Upgrade Kits are for PCNC 1100 owners using Tormach Machine Controllers with PCI or PCIe expansion card slots.

All Kits include the following:

  • PathPilot Software USB Drive
  • PCNC 1100 Series 3 Manual for PathPilot - Current Edition

Additional Options

  • PCI Controller Card or PCIe Controller Card (additional cost)

Identifying Your Controller for Upgrade

The Tormach PathPilot Upgrade Kit is only for customers who have previously purchased the Tormach Machine Controller, and currently own a Tormach PCNC 1100.

Use the following table to identify which Tormach controller you have, and how to upgrade to PathPilot software.

Click here for a Tormach Controller Identification Table

Tormach Controller Part Number (PN)

Upgrade Instructions

Special Notes

38249

Requires PathPilot upgrade USB Drive only

Sold from August 2014~present; Select PCNC 1100 PathPilot Upgrade Kit - Software & Manual (PN 35455)

31519-V (all versions with V suffix)

Open controller back; identify slot type (see "Selecting The Correct Upgrade Card" for additional information).

Purchase PathPilot Upgrade Kit and follow controller-specific installation instructions found in TD10342

31520

Open controller back; identify slot type (see "Selecting The Correct Upgrade Card" for additional information.)

Purchase PathPilot Upgrade Kit and follow controller-specific installation instructions found in TD10342

31275

Open controller back; identify slot type (see "Selecting The Correct Upgrade Card" for additional information).

These controllers are over five years old and may exhibit sluggish response to operator input, especially when using CNC scanner feature. IMPORTANT: No Mach3 restore DVD exists for these controllers.

34119

Open controller back; identify slot type (see "Selecting The Correct Upgrade Card" for additional information).

Purchase PathPilot Upgrade Kit and follow controller-specific installation instructions found in TD10342

Other Tormach part numbers (PN)

Upgrade not supported

Continue to use Mach3 or purchase PathPilot controller (when available)

No Tormach part number (PN) found

Contact Tormach at: sales@tormach.com; include your name/company name, and mill serial number

Contact Tormach at: sales@tormach.com; include your name/company name, and mill serial number

Selecting The Correct Upgrade Card

Open your Tormach Machine Controller and determine whether your controller has a PCI or a PCI-E slot. (Be sure to disconnect all power to the controller). Please download and read TD10342 (available in the documents tab) for specific instructions on how to open your controller and where to find the necessary PCI slot.

If your computer has a PCI slot, it will be white, and approximately 3 long. Computers with PCI slots require PathPilot Upgrade Kit PN 38708.

The PCI-E slot is usually black, and 1 long. Computers with PCI-E slots require Path Pilot Upgrade Kit PN 38710.

Can't find your upgrade? Click here for a complete PathPilot system.

Please Note: Only one software disc per person, a single disc may be used on multiple controllers.


Available Products

Enter a quantity for the item you would like to add to your shopping cart then click the 'Add To Cart' button at the bottom of the listing to proceed. All fields are required.

N/A

Related Product Downloads & Documents

×