Project Library

Making an Automotive MAF Sensor Relocation Part
Making an Automotive MAF Sensor Relocation Part
This little part gives someone the ability to relocate the MAF (mass air flow) sensor in their Mitsubishi Evolution. This is a useful aluminum part that can be ...

Release Date: September 19, 2017

Project Time: 1 Hour

Author: Jacob Shields, Product Engineer, Jacks Transmissions

Difficulty:

Download


DIY Jack Stand
DIY Jack Stand
A jack stand is one of the tools needed to level your machine. While you can buy a small jack stand/screw, you've got access to a CNC machine, so here's how to make your own.

Release Date: June 30, 2017

Project Time: 1 Hour

Author: Tormach

Difficulty:

Download


CNC Fidget Spinner
CNC Fidget Spinner
Fidget spinners are the latest craze. Here’s how to make a simple one that feels great in your hand, created by Caleb Kraft, one of the Tormach Brand Ambassadors.

Release Date: April 21, 2017

Project Time: 2 Hours

Author: Caleb Kraft

Difficulty:

Download


Aluminum Yo-Yo
Aluminum Yo-Yo
This project will walk you through CNC machining the parts needed to build a modern “butterfly” yo-yo on your Tormach Slant Pro CNC lathe.

Release Date: March 20, 2017

Project Time: 2 Hours

Author: Jerome Miles

Difficulty:

Download


Darth Vader Cookie Mold
Darth Vader Cookie Mold
In this project, we are going to make a mold for Darth Vader shaped cookies from a plastic cutting board. I used cutting board material because it's food safe. This is a simple project with only one side of the material that needs to be milled.

Release Date: December 15, 2016

Project Time: 1 Hour

Author: Sand Hill CNC

Difficulty:

Download


Engraving Holiday Décor
Engraving Holiday Décor
Machining has a lot to offer when it comes to making holiday decorations. After stumbling onto a glass block in the clearance section of a hobby store, we took to our mill to do some fancy holiday engraving.

Release Date: November 20, 2016

Project Time: 45 Minutes

Author: Tormach Inc.

Difficulty:

Download


Arduino Enclosure
Arduino Enclosure
In this project, we’re going to create an aluminum enclosure for an Arduino. This project will walk you through a setup with multiple operations and the flipping of a part.

Release Date: September 20, 2016

Project Time: 1.5 Hours

Author: Tormach

Difficulty:

Download


FIRST Robotics Sprocket
FIRST Robotics Sprocket
FIRST provides opportunities for middle school and high school students to work together and build robots – what could be cooler! This project gets you started making custom-sized sprockets that can be used as chain idlers.

Release Date: August 20, 2016

Project Time: 1 Hour

Author: Sector 67

Difficulty:

Download


Precision Milled Pinewood Derby Car
Precision Milled Pinewood Derby Car
This project focuses on taking a Pinwood Derby car to the next level by precision milling it with a Tormach PCNC mill.

Release Date: August 20, 2016

Project Time: 1 Hour

Author: Tormach

Difficulty:

Download


Mechanical Sprocket
Mechanical Sprocket
This project walks through the machining of a standard FS250-10 mechanical sprocket, which can be used in a variety of motor applications or adapted for other uses.

Release Date: July 20, 2016

Project Time: 2 Hours

Author: Sector 67

Difficulty:

Download