Tormach 15L Slant-Pro™ Lathe Videos

  • Tormach 15L Slant-PRO™ - Turret and Gang Tooling Overview

    Watch Now

    Tormach's 15L Slant-PRO™ Lathe has three options for tool holding; a turret, a quick-change tool post, and gang tooling.

    Jason, a machinist at Tormach, walks through the features of the turret and how to do some basic operations while using it.

    Learn more about the 15L Slant-PRO™ Lathe: http://torma.ch/9
    Learn more about Tormach Gang Tooling: https://goo.gl/jP9SFc

    Tormach 15L Slant-PRO™ Gang Tooling Overview

    Watch Now

    Tormach's 15L Slant-PRO™ Lathe has three options for tool holding; a turret, a quick-change tool post, and gang tooling.

    Jason, a machinist at Tormach, walks through the features of using gang tooling and how to do some basic operations while using it.

    Learn more about the 15L Slant-PRO™ Lathe: http://torma.ch/9
    15L Slant-PRO™ Lathe Overview: https://goo.gl/gOHyOJ
    Quick Change Overview: https://goo.gl/GBKxbu
    Turret Overview: https://goo.gl/ND75j0

  • Tormach 15L Slant-PRO™ Turret Overview

    Watch Now

    Tormach's 15L Slant-PRO™ Lathe has three options for tool holding; a turret, a quick-change tool post, and gang tooling.

    Jason, a machinist at Tormach, walks through the features of the turret and how to do some basic operations while using it.

    Learn more about the 15L Slant-PRO™ Lathe: http://torma.ch/9
    15L Slant-PRO™ Lathe Overview: https://goo.gl/gOHyOJ
    Quick Change Overview: https://goo.gl/GBKxbu

    Tormach 15L Slant-PRO™ CNC Lathe Overview

    Watch Now

    Jason Pulvermacher, a machinist at Tormach, gives an overview of the 15L Slant-PRO™ Lathe.

    The Tormach 15L Slant-PRO™ is a compact slant bed CNC Lathe designed for prototyping and specialty manufacturing of turned parts.

    Learn more: http://torma.ch/w

  • Cutting Your First Part on a Tormach Lathe

    Watch Now

    Tormach Control Engineer, Daniel Rogge, walks through cutting your first part on a Tormach 15L Slant-PRO Lathe found in chapter 4 of the operator's manual.

    Learn more about the 15L Slant-PRO Lathe: http://torma.ch/9
    Operator's Manual: http://torma.ch/a

    How to Install Turret Boring Bar Holders on the Tormach 15L Slant-Pro Lathe

    Watch Now

    Boring Bar Holder for Turret: http://goo.gl/Ojehrv
    In this video, Mike Corliss, uses a carbide endmill to machine out turret boring bar holders on the Tormach 15L Slant-Pro Lathe. The boring bar holders for the turret comes with a standard 1/2" bore, so they must be machined to a 3/4" bore size to accommodate most Tormach tool holders.

  • Cutting a Camera Step-Up Ring on a Tormach 15L Slant-PRO Lathe

    Watch Now

    Here's the Tormach 15L Slant-PRO Lathe cutting a camera step-up ring for a DSLR camera.

    Cutting starts at 0:38

    Tormach 15L Slant-PRO Lathe: http://goo.gl/5Mchwf
    Cutting a Plumb Bob on the Tormach 15L Slant-PRO Lathe: https://www.youtube.com/watch?v=NpYB7...
    Cutting a Custom Steel Bolt on the Tormach 15L Slant-PRO Lathe: https://www.youtube.com/watch?v=Orf7V...

    For more information on the Lathe, visit our Web site.

    Cutting a Custom Steel Bolt on the Tormach 15L Slant-PRO Lathe

    Watch Now

    Here's the Tormach 15L Slant-PRO Lathe cutting a custom steel bolt.

    Tormach 15L Slant-PRO Lathe: http://goo.gl/5Mchwf
    Camera Step-Up Ring on a Tormach 15L Slant-PRO Lathe : https://www.youtube.com/watch?v=Wizzh...
    Cutting a Plumb Bob on the Tormach 15L Slant-PRO Lathe : https://www.youtube.com/watch?v=NpYB7...

    For more information on the Lathe, visit our Web site.

  • Cutting a Plumb Bob on the Tormach 15L Slant-PRO Lathe

    Watch Now

    Here's the Tormach 15L Slant-PRO Lathe cutting a plumb bob, which can be used to create a vertical reference line in design and construction.

    Cutting starts at 0:24

    Tormach 15L Slant-PRO Lathe: http://goo.gl/5Mchwf
    Camera Step-Up Ring on a Tormach 15L Slant-PRO Lathe : https://www.youtube.com/watch?v=Wizzh...
    Cutting a Custom Steel Bolt on the Tormach 15L Slant-PRO Lathe : https://www.youtube.com/watch?v=Orf7V...

    For more information on the Lathe, visit our Web site.

    Tormach 15L Slant-PRO CNC Lathe: Setting Up the Tailstock

    Watch Now

    Tormach 15L Slant-PRO CNC Lathe: http://goo.gl/OF5CVm
    This video explains how to install the Tailstock onto the Slant-PRO Lathe.
    Check out our website for more information on the tailstock.

  • How to Adjust the 5C Collet Closer- Tormach CNC

    Watch Now

    Tormach 15L Slant-PRO CNC Lathe: http://goo.gl/WfUdi8
    5C Collet Closer Option: http://goo.gl/wMI7nn

    This video demonstrates the proper technique on how to set the tension on the manual 5C collet closer on the Tormach 15L Slant-PRO CNC Lathe. It covers how to tell if the tension is too tight or too lose and how to lock it into place once the correct tension has been determined. The lever action 5C collet closer option is PN 33283.

    For more information on the Slant-PRO Lathe click the link above.

    Tormach 15L Slant-PRO™ Quick Change Overview

    Watch Now

    Tormach 15L Slant-PRO CNC Lathe: http://goo.gl/omHA2I
    Quick Change Lathe Tool Holders: http://goo.gl/5Goj3M
    This video demonstrates how to install and work with the quick change tool post. Mike Corliss, Tormach machinist, also goes over a couple of tool holders with some turning tools and how to adjust their heights.

    Setting up the tool post @ 0:30
    Setting the height for the tool holders @ 3:05
    Setting up a facing tool @ 4:05
    Setting up an OD turning tool @ 9:09
    Setting up a drilling tool @ 10:05

    For more information on any of our products please visit our website or click the links above.

  • Tormach 15L Slant-PRO CNC Lathe: Working With the 5C Collet Insert

    Watch Now

    Tormach 15L Slant-PRO CNC Lathe: http://goo.gl/QGPjW6
    This video explains how to install and remove a 5C Collet Adaptor from the spindle nose of the chuck.
    Check out our website for more information on the lathe.

    Tormach CNC Lathe: Setting Work and Tool Offsets

    Watch Now

    Tormach 15L Slant-PRO CNC Lathe: http://goo.gl/jNemDf
    This video demonstrates how to accurately establish your work offsets and properly touch off your tools on the Slant-PRO CNC Lathe.
    Part 1: Establishing Work Offset @ 0:25
    Part 2: Setting Tool Offsets @ 4:30
    Click the link above for more product information.

  • Tormach 15L Slant-PRO CNC Lathe Installation Overview

    Watch Now

    Tormach 15L Slant-PRO CNC Lathe: http://goo.gl/XkY7S7
    An overview of the installation and setup for the Tormach 15L Slant-PRO CNC Lathe. Topics include:

    1. Initial Uncrating
    2. Coolant System and Oil System Installation
    3. Chuck Guard Installation
    4. Control System Installation

    How to Change Spindle Motor Pulleys on Tormach 15L Slant-PRO CNC Lathe

    Watch Now

    Tormach 15L Slant-PRO Lathe- http://goo.gl/4zA0G2
    The Tormach 15L Slant-PRO CNC lathe comes with two spindle motor pulley sets. This video provides an overview of how to change out the pulley.

    The 80mm pulley provides spindle speed range from 180-2500 RPM and is suitable for use with a D1-4 Lathe Chuck. The 100mm pulley provides a spindle speed range from 250-3500 RPM and should only be used for 5C collet work using the native taper of the spindle.

  • How to Install and Use a D1 Lathe Chuck - Tormach CNC

    Watch Now

    3-Jaw Reversible 6" Lathe Chuck- http://goo.gl/RMjXty
    4-Jaw Independent Reversible 6" Lathe Chuck- http://goo.gl/syimkH
    This video demonstrates how to properly install a D1-4 Lathe Chuck on the Tormach 15L Slant-PRO CNC Lathe.

    Tormach 15L Slant-PRO CNC Lathe Lifting Kit

    Watch Now

    Tormach Lathe Lifting Kit (PN 33269): http://goo.gl/jJWghc
    Lifting Kit for the Tormach 15L Slant-PRO CNC Lathe is used to safely remove the lathe from the shipping pallet without the need for a fork lift.
    Visit the link above to find out more information!

Live Help Chat
Live Chat Software