Tormach Tooling System -ER Collets and Tool holders

About ER Collets and Tool holders

ER collets are an industry standard (DIN 6499) self-extracting collet. The ER system is a preferred method for holding small diameter tools with a minimum of tool runout.  ER collets are sold in fractional and metric size increments and easily snap into our TTS ER holders.

Tormach offers both ER-20 and ER-16 toolholders and collets. The ER-20 system can be used to hold tools up to 1/2” in diameter. ER-16 is a smaller size and can hold diameters up to 3/8”.  Metric Collet sizes are also available.

TTS - ER Collets and Tool Holders Documents

All TTS - ER Collets and Tool Holders Documents

05/03/12 - U10044M: Tormach Tooling System Manual (844 kb)
Product Manual for the Tormach Tooling System.
04/19/12 - DS10100: TTS Collets Datasheet (601 kb)
TTS Collets Datasheet
10/26/10 - Preventing Collet Slip (1002 kb)
Best practices and proper maintenance with R8, ER, Morse and other collet systems can greatly improve tool holding

TTS - ER Collets and Tool Holders Manuals

05/03/12 - U10044M: Tormach Tooling System Manual (844 kb)
Product Manual for the Tormach Tooling System.

TTS - ER Collets and Tool Holders Datasheets

04/19/12 - DS10100: TTS Collets Datasheet (601 kb)
TTS Collets Datasheet

TTS - ER Collets and Tool Holders Technical Documents

10/26/10 - Preventing Collet Slip (1002 kb)
Best practices and proper maintenance with R8, ER, Morse and other collet systems can greatly improve tool holding

TTS - ER Collets and Tool Holders Drawings

No documents available at this time.

TTS - ER Collets and Tool Holders Service Bulletins

No documents available at this time.

TTS - ER Collets and Tool Holders General Policies

No documents available at this time.