Come see Tormach at EAA AirVenture 2012 - Booth # 780 - July 23-29th in Oshkosh, WI.
Visit the Events page for more info.
Jan 30, 2012 -
New Workshop dates for April & May 2012 is now available on the workshops webpage.
Find your answers and see the most frequently asked Tormach questions on the FAQ page.
Give the perfect gift to your machinist with a Tormach Gift Certificate.
Submit your work and check out other machinist projects at the Tormach Customer Showcase.
Follow Tormach's blog, Milling Around, for the latest news and product updates.
Get hands on experience with Tormach's personal CNC Workshops. For more information click here.

PCNC 770 Uncrating Slideshow

Location: Information > Products > PCNC 770 Mill > PCNC 770 Mill > PCNC 770 Slideshow

Print this page

Generate PDF

PCNC 770 Uncrating

Uncrating and assembling the PCNC 770

37 images

Move the Crate into the work area with a pallet jack

Carefully cut the bands with a metal snip

Remove the top of the crate with a pry bar

Carefully lift away the top

Inside the crate...

Remove the sides with a pry bar

Carefully place the sides out of the way

Continue until all 4 sides have been removed

Remove the plastic wrap

Carefully Remove the strapping

The PCNC 770 is now sitting on the crate pallet

Remove the packing tape around the inside of the electrical cabinet.

Remove the tape from the inside of the door latch

Carefully open the acessories box

Inside the accessories box

Carefully unpack the manual oil pump if you chose this option

Inside the Oil pump box

The Oil line is wrapped up and attached to the machine

If you are going to use an Engine hoist, it will be necessary to cut the pallet down to size with a

The pallet has been cut to size so the engine hoist can be put into postition

Now you can use the pallet jack to lift the pallet off the waste boards

Move the hoist into place

Use the Lifting Bar as shown to carefully lift the PCNC 770 from the pallet

Another view of the Lifting Bar

With the mill in the air, move the stand into position

Carefully guide the mill over the stand

Align the mill with the stand studs

Attach the mill to the stand

Repeat at all 4 corners

Attach the right side chip tray

Tighten down the chip tray with the bolts

Attach the Oil pump to the stand

Attach the oil line to the pump

Fasten the oil lines to the machine with the guide clips

Put on the left side chip tray

Fasten the tray to the stand

You can now move the mill to final position. Then, you can plug it in to lift the head and remove th

© 2012 Tormach® LLC - All rights reserved worldwide.