Duality Lathe Tooling and Toolholders
About Duality Lathe Tooling and Toolholders
The Duality Lathe uses 0XA (Size 000) tool posts and tool holders. We carry a large assortment of wedge action tool posts and matching quick-change tool holders for all common lathe operations, including drilling, facing, boring, and parting. We also carry cutting inserts, center drills, arbor adaptors, and other lathe accessories.
PCNC Options - Duality Lathe Documents
All PCNC Options - Duality Lathe Documents
02/02/12 -
TD10046: Duality Lathe E-Stop Installation
(427 kb)
E-stop Installation for the Duality Lathe.
E-stop Installation for the Duality Lathe.
11/10/10 -
Duality Lathe Control Software Installation and Revision Information
(53 kb)
Mach3 (M3) is the current release of the operating software for the Tormach PCNC mill and Duality Lathe. It is based on a general purpose CNC control program known as Mach3. This document covers the current version of M3 designed to be used with the Duality Lathe when used in conjunction with the PCNC Mill. This software should not be confused with that which runs the PCNC 1100 Mill.
Mach3 (M3) is the current release of the operating software for the Tormach PCNC mill and Duality Lathe. It is based on a general purpose CNC control program known as Mach3. This document covers the current version of M3 designed to be used with the Duality Lathe when used in conjunction with the PCNC Mill. This software should not be confused with that which runs the PCNC 1100 Mill.
07/24/08 -
Duality Lathe Datasheet
(1085 kb)
Datasheet on the Duality Lathe.
Datasheet on the Duality Lathe.
07/11/08 -
Duality Lathe Manual
(4372 kb)
Manual for the Duality Lathe.
Manual for the Duality Lathe.
06/02/08 -
Duality CNC Lathe Whitepaper
(382 kb)
Design Analysis of the Duality Lathe.
Design Analysis of the Duality Lathe.
PCNC Options - Duality Lathe Manuals
07/11/08 -
Duality Lathe Manual
(4372 kb)
Manual for the Duality Lathe.
Manual for the Duality Lathe.
PCNC Options - Duality Lathe Datasheets
07/24/08 -
Duality Lathe Datasheet
(1085 kb)
Datasheet on the Duality Lathe.
Datasheet on the Duality Lathe.
PCNC Options - Duality Lathe Technical Documents
02/02/12 -
TD10046: Duality Lathe E-Stop Installation
(427 kb)
E-stop Installation for the Duality Lathe.
E-stop Installation for the Duality Lathe.
11/10/10 -
Duality Lathe Control Software Installation and Revision Information
(53 kb)
Mach3 (M3) is the current release of the operating software for the Tormach PCNC mill and Duality Lathe. It is based on a general purpose CNC control program known as Mach3. This document covers the current version of M3 designed to be used with the Duality Lathe when used in conjunction with the PCNC Mill. This software should not be confused with that which runs the PCNC 1100 Mill.
Mach3 (M3) is the current release of the operating software for the Tormach PCNC mill and Duality Lathe. It is based on a general purpose CNC control program known as Mach3. This document covers the current version of M3 designed to be used with the Duality Lathe when used in conjunction with the PCNC Mill. This software should not be confused with that which runs the PCNC 1100 Mill.
06/02/08 -
Duality CNC Lathe Whitepaper
(382 kb)
Design Analysis of the Duality Lathe.
Design Analysis of the Duality Lathe.