Software Downloads
Downloads
Tormach Utilities
Use this utility to calibrate spindle speed, configure probe sense, set up jog step increments for the jog shuttle, or enable fourth axis homing for your PCNC 1100 or 770 mill. Download the zip file to your desktop and then unzip it using winzip or other compression software.
Revision Date: 08/28/11
Tool Assistant provides the functionality of a conventional tool room presetter at a fraction of the cost. Measure and record tool height offsets with the touch of a button – No need to worry about misreading height gauges or mistyping data into the tool table. The handy software interface includes time-saving features to quickly help organize tool tables.
Revision Date: 01/11/11
Software for interfacing USB camera with CNC Mill for 2D dimensional scanning. Plug-in for Mach3.
Revision Date: 06/03/10
PCNC 1100 Machine Control Software
Machine control software for PCNC 1100 & PCNC 1100 Series II Mills with the TTS Automatic Tool Changer (PN 32279) installed. Please see TD10072: Tormach ATC Install Instructions and Software Revision Information. for install instructions and software revision information.
Revision Date: 04/12/12
Machine control software for Series 3 PCNC 1100 mills (serial #2000 and higher) with the TTS Automatic Tool Changer (PN 32279) installed. Please see TD10072: Tormach ATC Install Instructions and Software Revision Information. for install instructions and software revision information.
Revision Date: 04/12/12
Machine control software for Series 3 PCNC 1100 mills (serial #2000 and higher) and older PCNC 1100 Mills equipped with a Series 3 upgrade. Please see Series II Machine Control Software Installation and Revision Information for install instructions and software revision information.
Revision Date: 06/14/11
Machine control software for PCNC 1100 mills serial #1326-1999 and older PCNC 1100 Mills equipped with a Spindle Drive Upgrade (31090).
Please see Series II Machine Control Software Installation and Revision Information for install instructions and software revision information.
Revision Date: 06/14/11
Machine control software for the Duality Lathe. Since the Duality Lathe is an accessory to the PCNC 1100 mill, the mill control software should be installed first. Please see Duality Lathe Control Software Installation and Revision Information for install instructions and software revision information. Note: This software is compatible with PCNC Series II software only. For other configurations, please contact Tormach.
Revision Date: 11/10/10
Machine Control Software PCNC 1100 for mills serial #1-1325 (with factory spindle drive) - Mach3 with integrated CAM and special functions based on Mach 3 version 2.42. Please see M3 Machine Control Software Installation and Revision Information for install instructions and software revision information.
Revision Date: 11/05/08
PCNC 770 Machine Control Software
Machine control software for 770 mills (all serial numbers) with the TTS Automatic Tool Changer (PN 32474) installed. Please see TD10072: Tormach ATC Install Instructions and Software Revision Information. for install instructions and software revision information.
Revision Date: 04/12/12
PCNC 770 Control Software Install Instructions for install instructions and software revision information.
Revision Date: 03/14/11
Post Files
This is the latest PCNC post file for the PCNC only versions of SprutCAM 2007 and 7. This post incorporates Tapping, multiple work offsets, Inverse Time federate mode (for true 4th axis operation), as well as incorporates Canned Cycles in 5D contouring, these were previously separate posts. The fix for "Zero Arc Radius" has also been added, and the post also allows for a scaling\or flipping of the A axis for 4th axis work. For information on how to install these posts download Please see Guide For Replacing Older Post Versions . For information about the capabilities and origin of the post, download Readme: PCNC Mill Postprocessor for SprutCAM . This post adds the tool library output at the beginning of the post and fixes the "Radius to end of arc" error.
Revision Date: 03/14/11
This is the latest LATHE post file for the PCNC only versions of SprutCAM 2007 and 7. This post is for the Duality Lathe. For information on how to install these posts download Guide For Replacing Older Post Versions for information about the capabilities and origin of the post, download Readme: PCNC Mill Postprocessor for SprutCAM .
Revision Date: 03/14/11
This is the latest LATHE post file for the ALL Posts versions of SprutCAM 2007 and 7. This post is for the Duality Lathe. For information on how to install these posts download Guide For Replacing Older Post Versions for information about the capabilities and origin of the post, download Readme: PCNC Mill Postprocessor for SprutCAM .
Revision Date: 03/14/11
Adds the PCNC 1100 to TurboCAD/CAM post list.
Revision Date: 08/21/07
Adds the PCNC 1100 to MasterCAM post list. Also, some customers have said that the mpfan.pst file included in MasterCAM has worked well for them.
Revision Date: 05/22/07
Demo Files
Christmas Codes
Tormach's Christmas Code 2009. To see what the finished code should look like, see a photo of Tormach's Christmas code.
Revision Date: 12/14/09
Tormach's Christmas Code 2008. To see what the finished code should look like, see a photo of Tormach's Christmas code.
Revision Date: 12/08/08