About SheetCAM
SheetCam is a low cost but feature packed CAM software program. SheetCam is suitable for milling, routing, plasma, waterjet, laser and oxy-fuel cutting. Below are some examples of what you can do with SheetCAM.Milling & Routing
Profile cutting: Inside, outside or no tool compensation; Multi pass cutting; Ramp cutting to allow plunging with non center-cutting tools; Finishing allowance for roughing tools; Selectable lead-in and lead-out; Climb or normal cut direction.Pocketing: Automatic island detection; Multi pass cutting; Adjustable stepover.
Drilling: Drill from circles or points in a DXF file; Peck drilling with controllable retract amount.
Manual Nesting
Step and Repeat Parts :Multiple parts can be nested on a sheet. They can be flipped and rotated to make most efficient use of the material.
Array Parts:
Parts can be placed in an array to quickly fill a sheet with minimum effort.
Post Processors
While G-code is theoretically a standard, most machines have their own dialects. To get over this, SheetCam comes with a wide variety of post processors. These can be fine-tuned to produce code for virtually any machine. Unlike many CAM packages the post format is freely available and documented. If you so wish you can create your own posts. The programming language used is versatile enough to cope with pretty much anything you could possibly want a machine to do.Custom posts can be written to your specifications. This service is normally free unless the post is particularly complicated. Some examples of specialist posts include machines with multiple heads, say a plasma cutter with a punch marking head.
SheetCAM Extended License (30659)A starter version of SheetCAM is included with your PCNC 1100 purchase. However, it is limited to only 100 lines of code. You can buy the extended license to allow unlimited lines of code. |
$198.47
 |
|