Previous page
Use a reciprocating saw or similar type saw to cut down the pallet You need to cut the pallet as close as possible to the PCNC 1100 without cutting machine parts This will allow the engine hoist to fit in close to the machine
To index page
Remove the small box from the pallet and discard the cut piece In the small box you will find the certificate of inspection, keys and a few installation tools Repeat the cutting process of the other side of the pallet
Next page

View from the back of the PCNC 1100 with part of the pallet removed Previous page Next page
View from the back of the PCNC 1100 with part of the pallet removed



Generated by: Jalbum 8.4 | Skin: Spartan