Previous page
Detach the Y-axis motor from the pallet and slide it close to the PCNC 1100 Use a reciprocating saw or similar type saw to cut down the pallet You need to cut the pallet as close as possible to the PCNC 1100 without cutting machine parts
To index page
View from the back of the PCNC 1100 with part of the pallet removed Remove the small box from the pallet and discard the cut piece In the small box you will find the certificate of inspection, keys and a few installation tools
Next page

This will allow the engine hoist to fit in close to the machine Previous page Next page
This will allow the engine hoist to fit in close to the machine



Generated by: Jalbum 8.4 | Skin: Spartan